http://www.chengxulighting.com
Home > Products > Road Lighting Series > High-Mast Lamps Series

High-Mast Lamps Series

Product categories of High-Mast Lamps Series, we are specialized manufacturers from China, High-Mast Lamps Series, High Mast Lamps suppliers/factory, wholesale high-quality products of High Mast Light R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Outdoor High Mast Lamp

Min. Order: 10 Bag/Bags

Model No.: CX-GG-005,CX-GG-007

Transportation: Ocean

High mast lighting is one of the most widely used and most effective source configuration of large area lighting engineering,mainly is suitable for the port,airport ,highway,city square,multilayer interchange bridge,large stadiums to large...
Expert Manufacturer of High-Mast Lamps Series
Energy-saving Solar High-mast Lamp Lift Type

Min. Order: 10 Bag/Bags

Model No.: CX-GG-002,CX-GG-003,CX-GG-004

Transportation: Ocean

Light Source: Sodium Lamp

Color Temperature(CCT): Warm White

Generally, it can be divided into lifting type and non-lifting type.The height of the lifting type main bar is generally more than 18 meters, and the electric lifting operation is convenient. When the lamp plate rises to the working position, it can...
China Manufacturer of High Mast Lamps
China High-Mast Lamps Series Suppliers

The High-mast Lamp is generally refers to the new lighting device which is composed of the steel taper light pole and the high power combination lamp frame of 15 meters or above.It consists of lamp holder, internal lamp, electric rod body and basic part.Lamp head modelling can according to user requirement, surroundings, lighting need specific and definite;The interior lamps are mainly composed of floodlights and projection lamps. The light source adopts NG400 high pressure sodium lamp, and the lighting radius is 60 meters.The bar body is usually a pyramid structure, which is made of steel plate, with a height of 15 to 40 meters, which consists of two to three sections.

High Mast Light Poleled street light

Material characteristics

1. Beautiful appearance, large lighting area, good lighting effect, concentrated light, uniform illumination, small glare and easy to control and repair.

2. Applicable places: city square, station, wharf, highway, stadium, overpass, etc.

3. The lamp pole is a high quality steel plate by moulding into a multi - pyramid splicing steel rod, through hot galvanizing anti-corrosion treatment.

4. The lamp frame is made of high quality stainless steel.

5. Fasteners bolts and nuts are stainless steel.

6. Light source:400W-1000W sodium lamp.

Specifications:

Height: from 18m to 50 m

Suit for: highway, expressway, parkway, freeway, central motorway junction, truck and bus terminals, railyards, ship docks, airports, ferry terminals, prisons, industrial and commercial sites, international borders.

Shape: round, multi-pyramidal, column form, polygonal or conical

Material:

Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2

Tolerance of Dimension: ±2%

Lighting Source: 400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²

Light plate: Various figure of selection ,material with hot dip galvanization steel frame

Lifting System: Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut

Electric Appliance Control Device: Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode

Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.

Joint of Poles: Insert mode, inner flange mode, face to face joint mode .

Design of pole: Against earthquake of 8 grade

Wind Speed: 80 Km/Hour

Welding: We has past flaw testing. Internal and external double welding makes the welding in shape

Thickness: 6 mm to 20 mm

Production Process:
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging

Packages: Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required





Communicate with Supplier?Supplier
Rachel Ms. Rachel
What can I do for you?
Contact Supplier